Meridian TITAN SR2 Operator's Manual page 31

2. Lower the rear jack stand, if equipped.
3. Remove the two hairpin retainer clips and
remove the protective cover. Place the
clips back into the retainer studs. Store the
cover in a location that prevents it from being
damaged.
4. Make sure there are no foreign objects or
impacted seed blocking the chute leading to
the conveyor.
5. Make sure the frame is clear of debris and
stand clear when placing the seed box onto
the seed tender.
WARNING
6. Using a suitable lifting device, carefully place
the seed box onto the unit.
19956
31