Meridian TITAN SR2 Operator's Manual page 24

5.2 ENGINE AND CONTROLS
A Kohler engine is used with this unit. Always
®
read the engine Operator's Manual supplied with
the seed tender for the detailed engine operating
procedures.
1. Electrical System Key Switch
This key switch controls the power to the
electrical system. Turn the key clockwise to turn
the electrical system ON. The key will remain
in the ON position when the engine is running.
Turn the key counterclockwise to stop the
engine.
Turn the key switch to the START position to start
the engine. When the engine starts, then release
the key to allow it to return to the ON position.
24
2. Starting Rope
This retracting rope and T-bar is an optional
method used to start the engine. Turn the key
switch to the ON position. Grasp the T-bar
firmlyandpulltheropesharplytostartthe
engine. The key switch must be in the ON
position for the engine to run.
3. Throttle Actuator
The throttle actuator is an electronic unit to
control the engine speed by a switch mounted
at the end of the discharge spout. This allows
thepersonfillingtheplanterboxestocontrol
theoutputflowofseed.