Delivering Seed To Planter - Meridian 4055 SEED EXPRESS Operator's Manual

Bulk seed tender
Table of Contents

Advertisement

Operator's Manual: 4055 Seed Express
ELECTROCUTION HAZARD
Keep away from power lines.
• Be aware of your surroundings when raising
or lowering the conveyor tube.
• Maintain at least 20 feet between the
equipment and any electrical hazard.
• Contact with electricity can result in serious
personal injury or death.
UPENDING HAZARD
Always unload compartment 2 first to maintain
a positive tongue weight. Negative tongue
weight can cause the hitch to rapidly swing
upward if not securely fastened to the tow
vehicle, which can result in personal injury.
1. Before unloading, shut off engine on the tow
vehicle, set the parking brake, and remove
the ignition key.
2. Turn the control panel key switch to ON.
3. Start the engine:
a. Move the fuel valve lever to the ON
position.
b. To start a cold engine, move the choke
lever to the CLOSED position.
c. Turn the key switch to the START position.
Release the key when the engine ignites.
4. Allow the engine to warm up for two to three
minutes.
- Gradually open the choke as engine
warms.
5. Move the throttle lever to run the engine at
full speed.
6. Unlock the conveyor tube.
11.2022
Bulk Seed Tender

3.10 DELIVERING SEED TO PLANTER

®
Fig 35 - Conveyor hopper
Fig 36 - Unlock the conveyor tube
®
3-21

Advertisement

Table of Contents
loading

Table of Contents