Technical Specifications; Standards And Authorizations - Siemens SIMATIC ET 200AL System Manual

Technical specifications

Introduction
The technical specifications of the system are found in this section:
● The standards and test values that the ET 200AL distributed I/O system complies with
and fulfills.
● The test criteria according to which the ET 200AL distributed I/O system was tested.
Technical specifications for the modules
The technical data of the individual modules can be found in the modules' manuals. If there
are discrepancies between the statements in this document and the product manuals, the
statements in the product manuals take priority.
Reference
The certificates for the markings and approvals can be found on the Internet
(https://support.industry.siemens.com).
10.1

Standards and authorizations

Currently valid markings and authorizations
Note
Details on the components of the ET 200AL distributed I/O system
The currently valid markings and approvals are printed on the components of the ET 200AL
distributed I/O system.
Distributed I/O system
System Manual, 08/2019, A5E31861578-AG
10
81