Siemens SIMATIC ET 200AL System Manual page 115

Index
I
I/O modules, 11
Identification data, 72
Identification label, 11, 42
Mounting, 42
Removing, 42
Infeed
grounded, 27
non-grounded, 27
Installation position, 20
Insulation, 90
Insulation monitoring, 29
Interface module
PROFIBUS DP, 11
PROFINET IO, 11
Wiring, 37
Interface modules, 11
L
Line voltage, 26
M
M12 connectors, 39
M8 connectors, 38
Maintenance, 76
Maintenance data, 72
Marking
Factory-marked, 41
Interfaces, 41
Optional, 42
Maximum configuration
Electrical, 15
Mechanical, 14
Mechanical ambient conditions, 88
Minimum clearances, 20
Mounting, 21
I/O module, 23
Interface module, 22
O
Option handling, (See configuration control)
Overall configuration, 28
P
PELV, 27
Pin assignment, 39, 41
114
Power supply
Connector, 11
Power cable, 11
PROFIenergy, 67
PROFINET IO, 65
Protection class, 90
Protective measures, 29
Pulse-shaped disturbance variables, 85
R
Radio interference, 84
Rated voltage, 90
Reference potential
grounded, 27
non-grounded, 27
S
Safe electrical isolation, 27
Safety relay, 92
Screws, 21
SELV, 27
Setup, 9
Shock, 88
SIMATIC ET 200AL, 8
Sinusoidal disturbance variables, 86
Slot number, 77
Sockets, 40
Spare parts, 95
Standards, 81
System conditions, 25
System configuration
Grounded reference potential, 27
Protective measures, 29
Ungrounded reference potential, 27
T
Technical specifications
Standards and authorizations, 81
Test voltage, 90
TN-S grid, 27
Tool, 21
Transport and storage conditions, 87
TÜV certificate, 93
U
Ungrounded infeed, 27
System Manual, 08/2019, A5E31861578-AG
Distributed I/O system