Configuring - Siemens SIMATIC ET 200AL System Manual

Configuring

Introduction
You configure and assign parameters for the ET 200AL distributed I/O system (interface
modules and I/O modules) using STEP 7 or the configuration software of another
manufacturer.
Requirements
Table 6- 1
Configuration software
STEP 7 (TIA Portal) as of V14
for modules:
•
•
STEP 7 (TIA Portal) V13 SP1 or
higher for modules:
•
•
STEP 7 (TIA Portal) V13 SP1 or
higher for modules:
•
•
STEP 7 (TIA Portal) V13 SP1 or
higher for modules:
•
•
•
•
•
•
STEP 7 as of V5.5 SP4 for
modules:
•
•
44
Configuration software and requirements
DIQ 16x24VDC/0.5A 8xM12
AQ 4XU/I, 4XM12
DI 8x24VDC 4xM12
DI 16x24VDC 8xM12
DIQ 4+DQ 4x24VDC/0.5A
4xM12
DQ 8x24VDC/2A 8xM12
IM 157-1 PN
IM 157-1 DP
DI 8x24VDC 8xM8
DIQ 4+DQ 4x24VDC/0.5A
8xM8
AI 4xU/I/RTD 4xM12
CM 4xIO-Link 4xM12
IM 157-1 PN
IM 157-1 DP
Requirements
PROFINET IO, PROFIBUS DP:
•
as of Support Package HSP 0194
PROFINET IO, PROFIBUS DP:
•
as of Support Package HSP 0155
PROFINET IO, PROFIBUS DP:
•
as of Support Package HSP 0156
none, integrated in STEP 7
•
PROFINET IO:
•
as of Support Package HSP 0259
PROFIBUS DP:
•
as of Support Package HSP 0258
Installation information
STEP 7 online help
Distributed I/O system
System Manual, 08/2019, A5E31861578-AG
6