Chapter 2: Installation - Fire-Lite MS-9200(C) Instruction Manual

Installation
CHAPTER 2
Carefully unpack the system and check for shipping damage. Mount the cabinet in a clean, dry, vibration-free area
where extreme temperatures are not encountered. The area should be readily accessible with sufficient room to easily
install and maintain the panel. Locate the top of the cabinet approximately 5 feet (1.5 m) above the floor with the
hinge mounting on the left. Determine the number of conductors required for the devices to be installed. Sufficient
knockouts are provided for wiring convenience. Select the appropriate knockout(s) and pull the required conductors
into the box. All wiring should be in accordance with the National and/or Local codes for fire alarm systems.
MS-9200 Cabinet Dimensions
FIGURE 2-1:
To remove
To remove
entire
inner
knockout,
knockout,
strike here.
strike here.
Installation
BB-17F
Document #51003 Rev.E 01/11/02 P/N 51003:E
23