6: Load; Program Change - Level 2 - Fire-Lite MS-9200(C) Instruction Manual

Program Change - Level 2

3.3.6 Load
While displaying the Program Menu, program selection '5' sets up the MS-9200 for transfer of its application data-
base from/to a DOS-based or Window-based computer. This may be used to save the program that exists in an
MS-9200 for security and future service reasons; or may be used to transfer a program created off-line to the
MS-9200. Refer to the PK-9200W Manual for additional information. When the Load option is selected, the follow-
ing screen will be displayed:
The left arrow key may be used to return to the program change screen. The PC connects to the EIA-232 printer
interface (instructions provided with the Upload/Download software kit). Continue to press the left arrow key to
return to the main program screen.
3.4 Program Change - Level 2
While the MS-9200 system is normal with no active alarms, troubles or supervisories, the screen shown below will be
displayed:
To access the programming mode, the ENTER key must be pressed, causing the following screen to be displayed:
Pressing '1' will cause the following screen to appear:
CONNECT COMPUTER NOW
RUN PROGRAM FROM PC.
SYSTEMS ALL NORMAL
10:00A MON 01/08/01
1 = PROGRAMMING
2=RD STATUS 3=RD BAT
KEY PASSWORD, ENTER
Document #51003 Rev.E 01/11/02 P/N 51003:E
47