Inspect The Module For Damage - Keysight Technologies M9260A Startup Manual

Inspection, Installation, and Verification 1

Inspect the module for damage

Unpack the M9260A module from the shipping container. Keep the plastic port
protectors and the shipping container for possible reuse.
After unpacking the M9260A module, carefully inspect the unit for any shipping
damage. Report any damage to the shipping agent immediately, as such damage
is not covered by the warranty.
The warranty also does not cover:
– Damage from contamination
– Normal wear and tear of mechanical components
– Manuals or fuses
To avoid damage when handling the M9260A module, do not touch the
CAUTION
exposed connector pins.
Information on preventing damage to your Keysight equipment can be found at
NOTE
www.keysight.com/find/tips.
Keysight M9260A Startup Guide 21