Inspect The Module For Damage - Keysight Technologies M9216A Startup Manual

Keysight M9216A PXI High Voltage Data Acquisition
Purchase acceptable ESD accessories from your local
supplier.
• Conductive table- mat and wrist- strap combination.
• Conductive floor- mat and heel- strap combination.
Both types, when used together, provide a significant level of
ESD protection. Of the two, only the table- mat and
wrist- strap combination provides adequate ESD protection
when used alone. To ensure user safety, the static- safe
accessories must provide at least 1 Ω of isolation from
ground.
These techniques for a static-safe work station should not be used
WA R N I N G
when working on circuitry with a voltage potential greater than
500 V.

Inspect the module for damage

After unpacking the M9216A, carefully inspect the unit for
any shipping damage. Report any damage to the shipping
agent immediately, as such damage is not covered by the
warranty (warranty information can be found at the
beginning of this manual).
To avoid damage when handling a module, do not touch exposed
C A U T I O N
connector pins.
Information on preventing damage to your Keysight equipment can be
N O T E
found at http://www.keysight.com/find/tips.
M9216A Startup Guide 3