Step 1: Unpack And Inspect The Module; Esd Precaution - Keysight Technologies M9260A Startup Manual

Step 1: Unpack and Inspect the Module

The M9260A PXIe Audio Analyzer is shipped in materials which prevent
CAUTION
damage from static. The module should only be removed from the packaging
in an anti-static area after ensuring that correct anti-static precautions are
taken. Store all modules in anti-static envelopes when not in use.

ESD precaution

Electrostatic discharge (ESD) can damage or destroy electronic components. All
work on electronic assemblies should be performed at a static-safe work station.
The following are the recommended ESD accessories and can be purchased from
your local supplier.
– Conductive table mat with wrist-strap combination.
– Conductive floor mat with heel-strap combination.
Both types, when used together, provide a significant level of ESD protection. Of
the two, only the table mat with wrist-strap combination provides adequate ESD
protection when used alone. To ensure user safety, the static-safe accessories
must provide at least 1 Ω of isolation from ground.
Figure 1-1
protection: conductive table mat with wrist-strap combination, and conductive
floor mat with heel-strap combination.
Keysight M9260A Startup Guide
shows an example of a static-safe work station using both types of ESD
Inspection, Installation, and Verification 1
19