Step 1: Unpack And Inspect The Module; Esd; Inspect For Damage; Return A Module For Service - Keysight Technologies M9300A Startup Manual

Pxie frequency reference 10 mhz and 100 mhz

Hide thumbs Also See for M9300A:

Table of Contents

Step 1: Unpack and Inspect the Module

The module is shipped in materials which prevent damage from static. The module should only be removed

from the packaging in an anti-static area ensuring that correct anti-static precautions are taken. Store all mod-

ules in anti-static envelopes when not in use.

DO NOT use these techniques for a static-safe work station when working on circuitry with a voltage potential

greater than 500 volts.

After unpacking a module, inspect it for any shipping damage. Report any damage to the shipping agent

immediately, as such damage is not covered by the warranty (see warranty information at beginning of this

document).

To avoid damage when handling a module, do not touch exposed connector pins.

See

www.keysight.com/find/tips

Should it become necessary to return a module for repair or service, follow the steps below:

1. Review the warranty information shipped with your product.

Keysight M9300A PXIe Frequency Reference Startup Guide

Electrostatic discharge (ESD) can damage or destroy elec-

tronic components. Use a static-safe work station to per-

form all work on electronic assemblies. The figure (left)

shows a static-safe work station using two types of ESD pro-

tection: conductive table-mat and wrist-strap combination,

and conductive floor-mat and heel-strap combination. Both

types, when used together, provide a significant level of ESD

protection. Of the two, only the table-mat and wrist-strap

combination provides adequate ESD protection when used

alone. To ensure user safety, the static-safe accessories

must provide at least 1 MΩ of isolation from ground.

for information on preventing damage to your keysight equipment.

Step 1: Unpack and Inspect the Module

Table of Contents