Add Qos Policy - Allied Telesis AT-GS900M Series User Manual

Chapter 26: Policy-Based QoS Commands

ADD QOS POLICY

458
Syntax
policy_number
add qos policy=
Parameters
policy_number
Specifies a QoS policy number. The range is 0 to 255.
tc_list
Specifies a list of classifiers. To specify multiple traffic classes, use
a comma (,) to separate them. To specify a range of traffic classes,
use a hyphen (-).
Description
Use this command to associate traffic classes to a QoS policy.
Confirmation Command
"SHOW QOS POLICY" on page 494
Example
The following command adds traffic classes 1, 2, and 3 to QoS policy 1:
Manager > add qos policy=1 traffcclasslist=1-3
tc_list
trafficclasslist=
Section IV: Security and Traffic Control
|none