3. Installation
3.12 Address assignment of the valves
Festo P.BE-VTSA-44-EN en 1202g
The VTSA... can be configured with maximum as many valve
positions as there are addresses available
(
Tab. 1/2 ... Tab. 1/4 under "max. number of controllable
solenoid coils").
Address allocation (width 18 ... 52 mm)
–
Counting begins on the valve terminal from left to right
–
The number of assigned addresses per valve position
depends on the manifold sub-base; it is irrelevant wheth-
er the manifold sub-base is fitted with valves or cover
plates.
–
Manifold sub-base type VABV-...-T1:
– occupies one address per valve position
Identification features:
– rating plate with black dot
– colour of the solenoid coil contact housing in the
manifold sub-base: red
–
Manifold sub-base type VABV-...-T2:
– occupies two addresses per valve position
The following assignment applies:
– solenoid coil 14 occupies the lower-value address
– solenoid coil 12 occupies the higher-value
address.
Identification features:
– Colour of the solenoid coil contact housing in the
manifold sub-base: black
3-53