Page 2
The general terms and conditions of business (Allgemeinen Geschäftsbedingun- gen - AGB) of Festo SE & Co. KG apply; these can be read on the Festo website ( www.festo.com). Differences compared to the descriptions in these repair instructions may arise depending on the design and/or modification status of the pinch valve.
Tools General safety instructions and information General safety instructions General information Sizes, part numbers and component lists with bills of material Components overview VZQA-C-M22C-6-… 3.1.1 Parts list VZQA-C-M22C-6-… Components overview VZQA-C-M22C-15-… 3.2.1 Parts list VZQA-C-M22C-15-… Repair steps Dismantling Assembly Start-up...
Follow the given repair steps. Attention Pay particular attention to notes and information. Visual inspection Perform a visual inspection. Tools Use suitable tools. Functional test / start-up Follow the functional test / start-up information in the brief instructions ( www.festo.com). 4 / 22 VZQAa_en...
1.2.3 Cleaning and greasing Cleaning The components must be thoroughly cleaned to remove all foreign particles, machining residues and old lubricants before they are greased. Clean with a soft, lint-free cloth and non-abrasive cleaning agents. Check the compatibility of the clean- ing agent with the materials to be cleaned.
General safety instructions and information General safety instructions Warning Read and follow all safety instructions and information. Failure to comply with these safety instructions and informa- tion can result in serious injuries. Note To achieve ATEX conformity, the toothed discs must be replaced each time after loosening the corresponding screws or bolts.
Chapter 3.2.1 on page 11 The following diagrams are intended only to provide an overview of the individual components. To order spare and wearing parts, and sets of wearing parts please use the online spare parts catalogue on the Festo website ( www.festo.com/spareparts).
Page 22
Festo has the ap- mentation infringement of the protection rights of third propriate rights of use. Festo permits the user When exporting the electronic documenta- parties concerning the use of the electronic the use under the following conditions: tion, the licence holder must observe the documentation.