Appendix 8.1 Copyright; Changes; Product Follow-Up; Liability Claims For Defects / Warranty - Optimum Optimill MT 50E Operating Manual

8 Appendix
8.1 Copyright
Optimum Maschinen Germany GmbH
This document is protected by copyright. All derived rights are reserved, especially those of
translation, re-printing, use of figures, broadcast, reproduction by photo-mechanical or similar
means and recording in data processing systems, either partial or total.
8.2

Changes

Any changes in the construction, equipment and accessories are reserved for reasons of
enhancement. Therefore, no claims may be derived from the indications and descriptions.
Errors excepted!
8.3

Product follow-up

We are required to perform a follow-up service for our products which extends beyond ship-
ment.
We would be grateful if you could inform us of the following:

Modified settings

Any experiences with the milling machine which might be important for other users

Recurring malfunctions

Difficulties with the documentation
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26
D-96103 Hallstadt, Germany
email: info@optimum-maschinen.de
8.4

Liability claims for defects / warranty

Beside the legal liability claims for defects of the customer towards the seller, the manufacturer
of the product, OPTIMUM GmbH, Robert-Pfleger-Straße 26, D-96103 Hallstadt, does not grant
any further warranties unless they are listed below or were promised in the framework of a sin-
gle contractual provision.

The processing of the liability claims or of the warranty is performed as chosen by OPTI-
MUM GmbH either directly or through one of its dealers.
Any defective products or components of such products will either be repaired or replaced
by components which are free from defects. Title to replaced products or components is
transferred to OPTIMUM Maschinen Germany GmbH.

The automatically generated original proof of purchase which shows the date of purchase,
the type of machine and the serial number, if applicable, is the precondition in order to
assert liability or warranty claims. If the original proof of purchase is not presented, we are
not able to perform any services.

Defects resulting from the following circumstances are excluded from liability and warranty
claims:
- Using the product beyond the technical options and proper use, in particular due to over-
straining of the machine.
- Any defects arising by one's own fault due to faulty operations or if the operating manual
is disregarded.
- Inattentive or incorrect handling and use of improper equipment
- Unauthorized modifications and repairs
- Insufficient installation and safeguarding of the machine
- Disregarding the installation requirements and conditions of use
- atmospheric discharges, overvoltage and lightning strokes as well as chemical influences
Appendix
Version 1.0 dated 2017-05-24 Translation of the original instructions
OPTIMUM
M A S C H I N E N - G E R M A N Y
MT50E GB
Page 59