Loewe INDIVIDUAL SOUND PROJECTOR Service Manual page 24

2 Confirm Software Target and press the [Download]
button.
* When Source Filename is selected, Software
Target box is selected automatically.
* If Software Target is different, confirm again
Source Filename or re-open spDownloader.
Start Download
このボタンを押すと書き込みが開始されます
3 After downloading sccessfully, "Downloaded '
OK" is appeared.
Confirm "FLASH Write ok" on the Serial Log window.
4 Press the [Done] button.
5 For restarting, use the "STANDBY/ON" key of the
YSP-1100 or the remote control.
6 The display returns to screen (1).
Select SPID and perform steps 1 to 4 for writing.
Firm
DSP application
SPID
Confirm Software Target Confirm Software Target.
Software Target項目を確認します Software Target項目を確認します
'
*****
Confirm "FLASH Write ok"
FLASH Write ok を確認します
Software Target
SPCM Application
SPCM init Data
During downloading
書き込み中
Confirm "OK"
OK を確認します
SP-1
23