Loewe INDIVIDUAL SOUND PROJECTOR Service Manual page 20

Hide thumbs Also See for INDIVIDUAL SOUND PROJECTOR:

Table of Contents

7. Connect the power cable of YSP-1100 to the AC outlet.

While pressing the "VOL+" key and "VOL-" key of the

YSP-1100, press the "STANDBY/ON" key of the re-

mote control to activate the DIAG function.

1 Using the "UP" or "DOWN" key of the remote control,

select the DIAG menu in the figure below.

2 Using the "LEFT" or "RIGHT" key of the remote

control, select the DIAG sub-menu in the figure

below.

3 Using the "ENTER" key of the remote control, make

a change as shown below.

8. When the program transmission is completed, the

screen appears as shown below.

During downloading

書き込み中

Change OFF to ON

SP-1

Table of Contents

Show Quick Links

Table of Contents

Need help?

Do you have a question about the INDIVIDUAL SOUND PROJECTOR and is the answer not in the manual?