Kompernass KH 6002 Operating Instructions Manual page 6

t
4. Insert the supplied battery into the battery com-
t
partment in the computer casing
terminal first. Make sure the polarity is correct!
5. Connect the computer and the device via the
u
connector (if required) without bending or
breaking the pins inside.
y
y
: negative
6. Press slightly on the lug
7. Place the device on a firm, level surface with a
u
- 4 -
y
ter into the post without pinching the cable. If
necessary, rotate the computer
splay lettering can be read during training.
non-slip protective covering for your floor or car-
pet. Maintain a safe distance around the device
of 2 x 2 m away from other objects and walls.
i
i
and insert the compu-
y
so that the di-