System expansions
Removing the hard disk drive
► Open the casing (see
"Opening the casing", Page
35).
1
a
2
a
1
► Disconnect the cables (a) connected to the hard disk drive.
► Press the brackets of the EasyChange rails on the hard disk drive in the direction of the
arrow (1) and pull the hard disk drive out of the drive cage in the direction of the arrow (2).
► Pull the EasyChange rails off the hard disk drive.
► If you no longer need the EasyChange rails, secure them again at their location in the drive cage.
It may be necessary to modify the entry for the drive in the BIOS Setup.
54
Fujitsu