Installing A Hard Disk Drive - Fujitsu CELSIUS W570power Operating Manual

Installing a hard disk drive

► Open the casing (see
► Secure the EasyChange rails to the side of the hard disk drive by inserting the
upper pins of the EasyChange rail into the corresponding holes of the hard
disk. The connections (a) face towards the front.
a
► Slide the hard disk drive with the EasyChange rails into the drive cage in the
direction of the arrow (1). Make sure that the hard disk drive connections (a)
are pointing outwards as shown in the diagram.
► Connect the cables to the hard disk drive (a).
► Close the casing (see
It may be necessary to modify the entry for the drive in the BIOS Setup.
Fujitsu
"Opening the casing", Page
1
"Closing the casing", Page
35).
36).
System expansions
a
a
55