System expansions
Removing an accessible drive
► Open the casing (see
"Opening the casing", Page
35).
1
2
► Disconnect the cables connected to the drive.
► Slide the clip in the direction of the arrow (1).
► Pull the drive out of the casing in the direction of the arrow (2).
► Remove the drive cover from the drive (1).
1
1
► Place the drive cover on the holder in the direction of the arrow (1).
► If necessary, make the required settings on the remaining hard disk drives.
► Close the casing (see
"Closing the casing", Page
36).
Fujitsu
47