Installing An Accessible Drive - Fujitsu CELSIUS W570power Operating Manual

System expansions

Installing an accessible drive

► Open the casing (see
► Break out the pre-cut plastic cover on the drive bay.
► Fit the drive cover for the 5
the 5 / inch drive", Page
1
4
► Slide the accessible drive into the casing until it snaps in place (1).
► Connect the cables to the drive. Make sure the polarity is correct.
► Close the casing (see
It may be necessary to modify the entry for the drive in the BIOS Setup.
46
"Opening the casing", Page
/ inch drive (see
1
4
45).
"Closing the casing", Page
35).
"Fitting the drive cover for
1
36).
Fujitsu