Fujitsu CELSIUS R920 Operating Manual

Fujitsu CELSIUS R920 Operating Manual

Professional pc
Hide thumbs Also See for CELSIUS R920:
Table of Contents

Advertisement

Professional PC
Operating Manual
CELSIUS R920 / R920power

Advertisement

Table of Contents
loading

Summary of Contents for Fujitsu CELSIUS R920

  • Page 1 Professional PC Operating Manual CELSIUS R920 / R920power...
  • Page 2 For automatic driver updates, go to:"http://support.ts.fujitsu.com/com/support/index.html" Should you have any technical questions, please contact: • our Hotline/Service Desk (see the Service Desk list or visit: "http://ts.fujitsu.com/support/servicedesk.html") • Your sales partner • Your sales office We hope you really enjoy using your new Fujitsu system.
  • Page 4 You will find more information at "http://ts.fujitsu.com/terms_of_use.html" Order No. Fujitsu Technology Solutions GmbH: A26361-K1400-Z320-1-7619, edition 1...
  • Page 5 CELSIUS R920 / R920power Operating Manual Your CELSIUS... Ports and operating elements Important notes Getting started Operation Troubleshooting and tips System expansions Technical data Index...
  • Page 6 CELSIUS is a registered trademark of Fujitsu Technology Solutions GmbH. Windows 7, Windows Vista and Windows XP are registered trademarks of Microsoft Corporation. PS/2 is a registered trademark of International Business Machines, Inc. Pentium is a registered trademark of Intel Corporation, USA.
  • Page 7: Table Of Contents

    The device cannot be switched off with the ON/OFF switch......28 Fujitsu Technology Solutions...
  • Page 8 Index ................. . 74 Fujitsu Technology Solutions...
  • Page 9: Your Celsius

    Some of the manuals listed can be found in electronic form on the "Drivers & Utilities" DVD. You can access and view the required information using the Acrobat Reader program, which is also included on the DVD. If necessary, you can also print out the manuals. Fujitsu Technology Solutions...
  • Page 10: Notational Conventions

    Names of CDs, DVDs and titles or designations for other materials, e.g.: "CD/DVD Drivers & Utilities" or "Safety/Regulations" manual indicates a key on the keyboard, e.g: indicates terms and texts that are emphasised or highlighted, e.g.: Do This font not switch off the device Fujitsu Technology Solutions...
  • Page 11: Ports And Operating Elements

    5 = Microphone jack 2 = Module bays for 3 inch slide-in modules 6 = USB ports 3 = ON/OFF switch 7 = Hard disk front panel (removable) 4 = Headphone port 8 = Latch with optional casing lock Fujitsu Technology Solutions...
  • Page 12: Rear

    Ports and operating elements Rear 1 = Holes for padlock / lead-seal and 3 = Ports for external devices fixture for Kensington Lock 4 = Slot covers 2 = Alternating voltage socket (AC IN) Fujitsu Technology Solutions...
  • Page 13: Important Notes

    If the device is brought from a cold environment into the room where it will be used, condensation may occur. Before operating the device, wait until it is absolutely dry and has reached approximately the same temperature as the installation site. Fujitsu Technology Solutions...
  • Page 14: Cleaning The Device

    Contact the corresponding government office in the respective country for current information on possible operating restrictions. If your country is not included in the list, then please contact the corresponding supervisory authority as to whether the use of this product is permitted in your country. Fujitsu Technology Solutions...
  • Page 15: Fcc Compliance Statement

    • Consult the dealer or an experienced radio/TV technician for help. Fujitsu Technology Solutions GmbH is not responsible for any radio or television interference caused by unauthorized modifications of this equipment or the substitution or attachment of connecting cables and equipment other than those specified by Fujitsu Technology Solutions GmbH.
  • Page 16: Getting Started

    Drives and boards If you have received drives or boards with your device, please do not install them until after first-time setup. How to install drives and boards is described in the "System expansions", Page 31 chapter. Fujitsu Technology Solutions...
  • Page 17: Setting Up The Device

    "Ambient conditions"). Protect the device against dust, humidity and heat. Connecting the machine to the mains Mainsadapter, ► Connect the mains cable to the machine (1). ► Plug the mains plug into a three-pin socket (2). Fujitsu Technology Solutions...
  • Page 18: Connecting External Devices

    ► Switch off all affected devices. Cable, ► Remove all power plugs from the grounded mains outlets. ► Unplug all data communication cables from the appropriate sockets. ► Disconnect all of the cables from the device and from the external devices. Fujitsu Technology Solutions...
  • Page 19: Ports On The Device

    USB 2.0 - Universal Serial Bus, black USB 3.0 - Universal Serial Bus, blue UniversalSerialBus eSATA port eSATA eSATA LAN port LANport Some of the connected devices require special software (e.g. drivers) (refer to the documentation for the connected device and operating system). Fujitsu Technology Solutions...
  • Page 20: Connecting A Monitor

    Only attach the monitor to your device when it is switched off. ► Follow the instructions contained in the monitor manual to prepare the monitor for operation (e.g. connecting cables). ► Connect the data cable to a suitable monitor port on the device (DVI-I, DisplayPort). Fujitsu Technology Solutions...
  • Page 21: Connecting The Mouse

    ► Plug the rectangular connector of the keyboard cable into the rectangular socket on the underside or on the rear of the keyboard. ► Plug the round plug of the keyboard cable into the keyboard port on the device. Keyboard, ► Switch your device on again. Fujitsu Technology Solutions...
  • Page 22: Connecting External Devices To The Usb Ports

    Plan a reasonable amount of time for this, as this process must not be interrupted. You may need the licence number for Windows during the installation. The licence number is located on a sticker on your device. Fujitsu Technology Solutions...
  • Page 23: Switch On The Monitor And The Machine

    ► If anything is unclear regarding the data you are asked to input, read the online Help in your operating system. You will find more information on the system, as well as drivers, utilities and updates on the "Drivers & Utilities" DVD and on the Internet under "http://ts.fujitsu.com/support/". Fujitsu Technology Solutions...
  • Page 24: Operation

    The ON/OFF switch does not disconnect the device from the mains voltage. To completely disconnect the mains voltage, remove the power plug from the power socket. ► If necessary, switch the monitor off (see the operating manual for the monitor). Fujitsu Technology Solutions...
  • Page 25: Indicators On The Device

    The indicator lights up when the hard disk drive in the device is being accessed. USB Security • The indicator is illuminated: The device is switched on. • The indicator is flashing: An unauthorised USB access takes place on the device. Fujitsu Technology Solutions...
  • Page 26: Keyboard

    The illustrated keyboard is an example and may differ from the model you use. 1 = Function keys 4 = Cursor keys 2 = On/off switch (optional) 5 = Numeric keypad (calculator keypad) 3 = Alphanumeric keypad Fujitsu Technology Solutions...
  • Page 27: Important Keys And Keyboard Shortcuts

    The Ctrl key is also called the "Control" or "Control key". Ctrl+Alt+Del Ctrl+Alt+Del Keys keyboardshortcuts Windows security/Task-Manager Ctrl This key combination opens the Windows Security/Task Manager window. Fujitsu Technology Solutions...
  • Page 28: Settings In Bios Setup

    Kensington Lock. Lead-sealing The casing can be sealed to prevent it being opened by unauthorised persons. To do this, feed the sealing chain through the holes (1) and seal the chain with the lead seal. Fujitsu Technology Solutions...
  • Page 29: Mechanical Casing Lock (Optional)

    Key turned towards the closed lock: The device is locked. • Key turned towards the open lock: The device is unlocked. Locking the casing ► Turn the key towards the closed lock. Unlocking the casing ► Turn the key towards the open lock. Fujitsu Technology Solutions...
  • Page 30: Bios Setup Security Functions

    Operating the SmartCard reader (optional) ► Connect the external SmartCard reader to your system as described in the instructions for the SmartCard reader. SmartCard reader, After the device is switched on, you will be prompted to insert your SmartCard. Fujitsu Technology Solutions...
  • Page 31: Troubleshooting And Tips

    ► For further clarification of the problem, contact the Service Desk for your country (see the Service Desk list or go to "http://ts.fujitsu.com/support/servicedesk.html"). When you do this, please have ready the ID number and serial number of your system.
  • Page 32: The Device Cannot Be Switched Off With The On/Off Switch

    ► Switch on the monitor and the device. Monitor cable not connected ► Switch off the monitor and the device. ► Check that the monitor cable is properly connected to the device and monitor. ► Switch on the monitor and the device. Fujitsu Technology Solutions...
  • Page 33: No Mouse Pointer Displayed On The Screen

    ► Check that the mouse cable is properly connected to the system unit. If you use an adapter or extension lead with the mouse cable, check the connections. ► Make sure that only one mouse is connected. ► Switch the device on. Fujitsu Technology Solutions...
  • Page 34: Time And/Or Date Is Not Correct

    7 can be found in the "Recovery Guide" manual. Tips Topic Out of system resources ► Close unnecessary applications. ► Run the applications in a different order. Other manuals Further manuals are provided as PDF files on the "Drivers & Utilities" DVD. Fujitsu Technology Solutions...
  • Page 35: System Expansions

    An update of the BIOS may be required for a system expansion or hardware upgrade. Further information can be found in the BIOS help section or if necessary in the Technical Manual for the mainboard. Fujitsu Technology Solutions...
  • Page 36: Information About Boards

    The equipment and tools you use must be free of static charges. • Only touch or hold the boards by the edge or, if present, at the areas marked green (Touch Points). • Never touch pins or conductors on boards fitted with ESDs. Fujitsu Technology Solutions...
  • Page 37: Opening The Casing

    ► On devices with a casing lock: Unlock the casing. ► Lay the device on its side in the manner shown. ► Pull the locking device (1) and swivel the side part in the direction of the arrow (2). Fujitsu Technology Solutions...
  • Page 38: Closing The Casing

    – Optional installation kit: maximum of eight 2 inch drives "Accessible drives" are e.g. DVD or CD ROM drives, into which a data medium can be inserted from outside. "Non-accessible drives" are for example hard disk drives. Fujitsu Technology Solutions...
  • Page 39: Installing And Removing The Accessible 5

    ► Push the drive metal plate upwards (2) so it is released from the catches with which it is secured. ► Lift the drive cover away from the casing (3). ► Put the drive metal plate onto the left-hand side of the drive (1). Fujitsu Technology Solutions...
  • Page 40: Installing An Accessible Drive

    "Closing the casing", Page 34). It may be necessary to modify the entry for the drive in the BIOS Setup. The fan for the processor and the card holder must be removed so that the data cables can be routed. Fujitsu Technology Solutions...
  • Page 41: Removing An Accessible Drive

    ► Disconnect the cables connected to the drive. ► Slide the clip in the direction of the arrow (1). ► Pull the drive out of the casing in the direction of the arrow (2). ► Remove the drive cover from the drive (1). Fujitsu Technology Solutions...
  • Page 42: Installing/Removing A 3½" Reader In A 3½" Bay (Optional, Smartcard Or Multicard)

    If you have ordered a device with a SmartCard or MultiCard reader, the module holder, SmartCard or MultiCard reader are already built in on delivery. If you have ordered a device without a SmartCard or MultiCard reader, a blind cover is installed instead of the module holder. Fujitsu Technology Solutions...
  • Page 43: Screwing The Reader Onto The Module Holder

    ► Connect the cables to the boards and the mainboard. Make sure the polarity is correct. ► Close the casing (see "Closing the casing", Page 34). The fan for the processor and the card holder must be removed so that the data cables can be routed. Fujitsu Technology Solutions...
  • Page 44: Removing A Module Holder With Reader

    ► Remove the reader from the module holder (see "Removing the reader from the module holder", Page 41) and install the metal and plastic cover in the drive bay. ► Close the casing (see "Closing the casing", Page 34). Fujitsu Technology Solutions...
  • Page 45: Removing The Reader From The Module Holder

    System expansions Removing the reader from the module holder ► Undo the screws (1). ► Pull the reader out of the module holder in the direction of the arrow. Fujitsu Technology Solutions...
  • Page 46: Installing And Removing A Wlan Module (Optional)

    To access the WLAN module bay, you first need to remove the front panel. ► Lift the locking lugs on the front panel (1). ► Fold the front panel in the direction of the arrow (2) and remove it from the casing (3). Fujitsu Technology Solutions...
  • Page 47: Installing The Wlan Module

    System expansions Installing the WLAN module Remove the metal panel The slot for the WLAN module is protected by a metal cover on delivery. ► Break out the pre-stamped metal cover (1) with a screwdriver. Fujitsu Technology Solutions...
  • Page 48 ► Slide the WLAN module into the slot in the direction of the arrow (1). Ensure that the screw holes on the casing and those on the WLAN module are precisely aligned over one another. ► Secure the WLAN module with the screws (2). ► Attach the cables to the WLAN module and mainboard. Fujitsu Technology Solutions...
  • Page 49: Removing The Wlan Module

    System expansions Removing the WLAN module ► Detach the cables from the WLAN module and mainboard. ► Undo the screws (1). ► Pull the WLAN module out of the bay the direction of the arrow (2). Fujitsu Technology Solutions...
  • Page 50: Securing The Front Panel

    ► Put the front cover onto the guide openings on the right of the casing. ► Fold the front panel in the direction of the arrow (1) until the catches (a) engage. ► Close the casing (see "Closing the casing", Page 34). Fujitsu Technology Solutions...
  • Page 51: Installing The Hard Disk Drive

    2 inch drives and two 3 inch drives • or four 3 inch drives Standard installation kit: Alternatively, you can purchase an optional upgrade installation kit in which you can install up to eight 2 inch drives: Fujitsu Technology Solutions...
  • Page 52 If you wish to change the installation kit from 3½ inch to 2½ inch before installing a hard disk, you must first remove the hard disk fan and the card holder. Removal of the hard disk fan, the card holder and fitting the installation kit are described in the following sections. Fujitsu Technology Solutions...
  • Page 53: Install A New Installation Kit

    ► Disconnect the fan cable from the mainboard. ► Move the catches of the fan in the direction of the arrow (1) so that the fan releases from the location. ► Remove the fan from the casing (2). Fujitsu Technology Solutions...
  • Page 54 ► If any hard disk drives are already installed, remove them (see "Removing a hard disk", Page 57). ► If necessary, disconnect the drive cables from the installation kit: Press the catch to unlock it and press the cable retainer backwards out of the opening. Fujitsu Technology Solutions...
  • Page 55 ► Take the old installation kit out of the casing (3). ► Insert the new installation kit into the casing (1). ► Secure the new installation kit with the screws (2). ► Secure the drive cables on the installation kit again. Fujitsu Technology Solutions...
  • Page 56 ► If required, connect further drive cables with sufficient drive connectors to the installation kit and the mainboard. Install card holder ► Place the card holder in the casing (1) and make sure that the catch engages. Fujitsu Technology Solutions...
  • Page 57 System expansions Install the hard disk fan ► Place the fan in the casing (1) and make sure that the catches engage. ► Connect the fan cable to the mainboard. Fujitsu Technology Solutions...
  • Page 58: Installing Hard Disks

    Removing the hard disk front panel ► Press the unlocking keys on the sides of the hard disk front panel (1). ► Fold the hard disk front panel in the direction of the arrow (2) and remove it from the casing. Fujitsu Technology Solutions...
  • Page 59: Installing A Hard Disk Drive

    "Opening the casing", Page 33). Installing a hard disk drive • Requirement: remove the protective grille (see "Removing the protective grille", Page 55). EasyChange rails for a second hard disk drive are mounted on the drive cage. Fujitsu Technology Solutions...
  • Page 60 If you are installing a 2½" hard disk drive, ensure that the label is on the top. ► Connect the cables to the hard disk drive. It may be necessary to modify the entry for the drive in the BIOS Setup. Fujitsu Technology Solutions...
  • Page 61: Removing A Hard Disk

    ► Press the levers of the EasyChange rails attached to the hard disk drive outwards (1), until the hard disk is released. ► Pull the hard disk drive out of the drive cage in the direction of the arrow (2). Fujitsu Technology Solutions...
  • Page 62 ► Pull the EasyChange rails off the hard disk drive. ► If you no longer need the EasyChange rails, secure them again at their location in the drive cage. It may be necessary to modify the entry for the drive in the BIOS Setup. Fujitsu Technology Solutions...
  • Page 63 ► Put the protective grille into the sheet metal lugs on the casing and fold it in the direction of the arrow (1). The protective grille is secured. ► Reattach the front panel to the casing (see "Securing the hard disk front panel", Page 60). Fujitsu Technology Solutions...
  • Page 64: Remove And Install Type 1 Boards

    If you wish to install a type 1 board, you must first remove the board fan and any type 2 boards which are present from the cross-piece. Then fold the cross-piece upwards so that you can install the board. This preliminary work is described in the following sections. Fujitsu Technology Solutions...
  • Page 65 ► Press the catch of the fan in the direction of the arrow (1) so that the fan releases from the location. ► Remove the fan from the casing (2). ► Disconnect the fan cable from the mainboard. Fujitsu Technology Solutions...
  • Page 66 ► Press on the lever (3) so that the catch releases the cross-piece. ► Carefully fold the cross-piece up (4), making sure not to break any fan cables. ► Detach the fan cables and remove the cross-piece. Fujitsu Technology Solutions...
  • Page 67 ► Push the retaining clip (1) towards the slot cover to unlock it, then move it towards the back panel of the device. ► Pull the slot cover out of the slot in the direction of the arrow (2). Fujitsu Technology Solutions...
  • Page 68 If you have installed or removed a board, please check the relevant slot settings in the BIOS Setup. If necessary, change the settings. Further information is provided in the board documentation. Fujitsu Technology Solutions...
  • Page 69: Perform Board Removal

    ► Push the retaining clip (1) towards the slot cover to unlock it, then move it towards back panel of the device. ► Pull the board out of the slot in the direction of the arrow (2). ► Place the board in suitable packaging. Fujitsu Technology Solutions...
  • Page 70 ► Press on the retaining clip until it you feel it engage (2). If you have installed or removed a PCI board, please check the relevant PCI slot settings in the BIOS Setup. If necessary, change the settings. Further information is provided in the PCI board documentation. Fujitsu Technology Solutions...
  • Page 71 ► Install the hood. ► Secure all the cables previously detached. ► If a type 2 board was installed and it was secured to the cross-piece, install the latter again (see "Remove and install type 2 boards", Page 69). Fujitsu Technology Solutions...
  • Page 72 System expansions Install board fan ► Connect the fan cable to the mainboard. ► Place the fan in the casing so that the catches (1) engage in the openings at the rear of the device. Fujitsu Technology Solutions...
  • Page 73: Remove And Install Type 2 Boards

    ► Close the casing (see "Closing the casing", Page 34). If you have installed or removed a board, please check the relevant slot settings in the BIOS Setup. If necessary, change the settings. Further information is provided in the board documentation. Fujitsu Technology Solutions...
  • Page 74: Removing A Board

    ► Open the casing (see "Opening the casing", Page 33). ► Remove the hood. ► Undo the screws on the heat sink. ► Lift the heat sink out of the casing. You can now replace the processor. Fujitsu Technology Solutions...
  • Page 75: Installing The Heat Sink

    ► Replace the processor as described in the manual for the mainboard. ► Install the heat sink again (see "Installing the heat sink", Page 71). Do not touch the contacts of the CPU socket! ► Close the casing (see "Closing the casing", Page 34). Fujitsu Technology Solutions...
  • Page 76: Replacing The Lithium Battery

    ► Press the catch in the direction of the arrow (1). The battery jumps out of the holder slightly. ► Remove the battery (2). ► Push the new lithium battery of the identical type into the holder (3) and press it down until it engages. Fujitsu Technology Solutions...
  • Page 77: Technical Data

    Rated frequency 50 Hz – 60 Hz Max. rated current 9,5 A – 4,0 A CELSIUS R920 (800 W), 100 V – 240 V 11,0 A – 5,5 A CELSIUS R920power (1100 W), 100 V – 240 V Dimensions Width/depth/height:...
  • Page 78: Index

    Connecting, Headphones 15 keyboard 17 mouse 17 PS/2 keyboard 17 PS/2 mouse 17 Important notes 9 USB keyboard 17 Installing, Contents of delivery 12 software 18–19 Cord switching on for the first time 18 see Cable 14 Fujitsu Technology Solutions...
  • Page 79 71 Security functions, Mainboard BIOS Setup 26 Upgrades 71 SmartCard 26 Mains adapter, Security measures 24 connecting 13 Servicing 31 Microphone jack 15 Setup, Monitor see BIOS Setup 24 Switching on 20 SmartCard reader, Monitor, operating 26 Fujitsu Technology Solutions...
  • Page 80 BIOS Setup 24 USB port 17 System unit, see Device 10 USB port, connecting devices 18 connecting keyboard 17 connecting the mouse 17 Transportation 9–10 User Documentation DVD 10 Universal Serial Bus 15 Workstation 13 Upgrades Mainboard 71 Fujitsu Technology Solutions...

This manual is also suitable for:

Celsius r920power

Table of Contents