Installing and removing an M.2 module
Installing an M.2 module
► Open the casing (see
► If necessary, remove the front fan and long component groups for easier installation (see
"Removing and fitting the front fan", Page 69
► Insert the M.2 module (b) at a slight angle in the direction of the arrow
(1) into the slot (a) on the mainboard.
► Secure the M.2 module on the mainboard with the screw (2).
► If you have removed the front fan and long component groups: Refit these components (see
"Removing and fitting the front fan", Page 69
► Close the casing (see
If necessary, you must adjust the entry for the drive accordingly in the BIOS Setup.
Fujitsu
"Opening the casing", Page
"Closing the casing", Page
35).
and
"Removing a board", Page
a
and
"Installing a board", Page
36).
System expansions
73).
2
1
b
71).
75