Installing And Removing The Hard Disk Drive - Fujitsu SCENIC6511 Operating Manual

System expansions

Installing and removing the hard disk drive

Open the system unit (see
Removing the hard disk carrier


Lift the hard disk carrier out of the mounting in the direction of the arrow (1) and (2).


Lift the hard disk carrier out of the system unit in the direction of the arrow (3) and (4).


Pull the data and power supply connectors from the hard disk drive or the hard disk drives.
Installing the first hard disk drive


Take the new hard disk drive out of its packaging.


Make the required settings (e.g. master/slave, stand alone) on the drives.
2


Insert the hard disk drive into the plastic bracket (1). The drive must engage in the plastic
nipple.


Fold the plastic bracket in the direction of the arrow (2) on the hard disk drive.


Push the hard disk drive into the drive bracket until the plastic bracket engages (3).
38
"Opening the system
3
4
2
1
unit").
1
2
3
A26361-K520-Z100-1-7619