Fujitsu CELSIUS W570power Operating Manual page 68

System expansions
a
► Secure the EasyChange rails to the side of the hard disk drive by inserting the
upper pins of the EasyChange rail into the corresponding holes of the hard
disk. The connections (a) face towards the rear.
► Slide the hard disk drive with the EasyChange rails into the drive cage in the
direction of the arrow (1). Ensure that the connections of the hard disk drive
face inwards towards the inside of the casing.
► Press the levers of the EasyChange rails in the direction of the arrow (1).
► Close the drive cage (see
If necessary, you must adjust the entry for the drive accordingly in the BIOS setup.
64
"Close the drive cage", Page 41).
Fujitsu