Installing A Hard Disk Drive - Fujitsu CELSIUS W570power Operating Manual

System expansions

Installing a hard disk drive

In the cold-plug process, the cables in the casing for the drive automatically lock
into place when the EasyChange rails are activated, as described below.
► Open the casing (see
a
► Secure the EasyChange rails to the side of the hard disk drive by inserting the
upper pins of the EasyChange rail into the corresponding holes of the hard
disk. The connections (a) face towards the rear.
► Slide the hard disk drive with the EasyChange rails into the drive cage in the
direction of the arrow (1). Ensure that the connections of the hard disk drive
face inwards towards the bottom of the casing.
► Press the levers of the EasyChange rails in the direction of the arrows (2).
► Close the casing (see
58
"Opening the casing", Page
2
1
2
"Closing the casing", Page
35).
36).
Fujitsu