System expansions
Installing and removing the hard disk drive
Removing the hard disk drive
► Open the casing (see
3
3
2
2
1
40
"Opening the casing", Page
1
1
34).
► Fold up the drive cage (1).
► If there is a drive in the drive cage,
disconnect the data and power supply
cables from the drive.
► Fold up the hard disk cage (2).
► Pull the data and power supply cable
off the hard disk (3).
► Press the two ends of the EasyChange
rails together (1) and pull out the
hard disk drive (2).
Fujitsu