Effects Edit - Roland FA-06 Parameter Manual

EFFECTS EDIT

1.
Press the [MENU] button .
2.
"Effects Edit"
Move the cursor to
The EFFECTS EDIT screen appears .
The EFFECTS EDIT screen shows the effect blocks and routing .
You can edit the values that are shown as red characters .
To edit a value, move the cursor to that value and turn
the dial .
The currently selected parameter and its value are
shown .
Parameter
MFX Switch
MFX Type
Chorus Send Level
Reverb Send Level
Chorus Sw
Reverb Sw
Chorus Type
Reverb Type
Master Comp Switch
Master EQ Switch
TFX Sw
TFX Type
IFX Part1–16 Switch *1
IFX Sw *1
IFX Type *1
IFX Chorus Send Level *1
IFX Reverb Send Level *1
Drum Comp/EQ Switch *2
Audio Input Level
NS Switch
Input Reverb Switch
Input Reverb Type
M .COMP/IFX Select
TFX Location
*1: This is shown only if M .COMP/IFX Select is set to
*2: This is shown only if you've selected the part specified by Drum Comp+EQ Assign .
14
[ENTER]
and press the
Value
OFF, ON
Selects the type of multi-effect (p . 93) .
0–127
0–127
OFF, ON
OFF, ON
Selects the type of chorus (p . 68) .
Selects the type of reverb (p . 68) .
OFF, ON
OFF, ON
OFF, ON
Selects the type of total effect (p . 20) .
* You can also set this in the TFX tab of SYSTEM EFFECTS (p . 19) .
OFF, ON
OFF, ON
Selects the type of insert effect (p . 69) .
0–127
0–127
OFF, ON
0–127
OFF, ON
OFF, ON
Selects the type of microphone input reverb (p . 18) .
M . Comp (Master Comp), IFX
MAIN, Input
"IFX."
button .
Explanation
Specifies whether multi-effect will be used (ON) or not used (OFF) .
Adjusts the amount of chorus .
If you don't want to add the chorus effect, set it to 0 .
*
You can also set this in the Output/EFX tab of PART VIEW (p . 10) .
Adjusts the amount of reverb .
If you don't want to add the reverb effect, set it to 0 .
* You can also set this in the Output/EFX tab of PART VIEW (p . 10) .
Switches the chorus on/off .
Switches the reverb on/off .
Switches the master compressor on/off .
Switches the master EQ on/off .
Specifies whether total effect will be used (ON) or not used (OFF) .
Switches each part's insert effect on/off .
Switches the insert effect on/off .
Adjusts the amount of chorus .
If you don't want to add the chorus effect, set it to 0 .
Adjusts the amount of reverb .
If you don't want to add the reverb effect, set it to 0 .
Turns the six drum kit compressor + equalizer units on/off together .
Adjusts the input volume of the AUDIO INPUT jack .
Switches the noise suppressor on/off .
Switches the microphone input reverb on/off .
Selects whether to use the master compressor (M .Comp) or the insert effect (IFX) .
Selects whether the total effect is applied to the sounds that you play from the keyboard (MAIN) or
to the sound being input via the AUDIO INPUT jack (Input) .