Pedal Tab; S1/S2 Tab; Knob Tab - Roland FA-06 Parameter Manual

Studio Set
Parameter

Pedal tab

Pedal Assign Source (System)
Pedal 1 Assign
Pedal 2 Assign

S1/S2 tab

S1/S2 Assign Source (System)
Assignable
Switch S1 Assign
Switch S2 Assign
Switch S1 Mode
Switch S2 Mode

Knob tab

Knob Assign Source (System)
Sound Modify Knob 1–6 Assign
6
Value
SYSTEM, STUDIO
Specify the functions that are controlled by pedals connected to the FOOT PEDAL CTRL 1 and 2 jacks .
OFF
CC01–31, 32 (OFF), 33–95
BEND DOWN
BEND UP
AFTERTOUCH
SYSTEM, STUDIO
Specify the functions that are controlled by the
Some of the SuperNATURAL acoustic tones let you use control changes to modify the character of the sound or switch to other variation
sounds . For details, refer to "SuperNATURAL Tone CC Assign"
*1: The Switch S1/2 Assign setting is fixed at
OFF
CC01–31, 32 (OFF), 33–95
AFTERTOUCH
MONO/POLY
CHORUS SWITCH *1
REVERB SWITCH *1
MASTER EQ SWITCH *1
TFX SWITCH *1
MASTER KEY DOWN *1
MASTER KEY UP *1
LATCH
MOMENTARY
SYSTEM, STUDIO
Specify the functions that are controlled by the SOUND MODIFY knobs .
OFF
CC01–31, 32 (OFF), 33–95
PITCH BEND
AFTERTOUCH
TFX PARAM 1–3
Explanation
Specifies whether the functions controlled by the pedals connected to the FOOT PEDAL CTRL
1 and 2 jacks will be determined by the system settings (SYSTEM) or by the studio set settings
(STUDIO) .
*
Pedal Assign Source (System) is a system parameter .
* "SYSTEM,"
If you choose the settings of the studio set parameters Pedal 1/2 Assign are ignored .
No function is assigned .
Controller number 1–31, 32, 33–95
The same effect as moving the pitch bend lever to the left .
The same effect as moving the pitch bend lever to the right .
Aftertouch
Specifies whether the functions controlled by the
system settings (SYSTEM) or by the studio set settings (STUDIO) .
* S1/S2 Assign Source (System) is a system parameter .
* If you choose "SYSTEM," the settings of the studio set parameters Switch S1/S2 Assign and
Switch S1/S2 Assign Mode are ignored .
[S1] [S2]
buttons .
(p . 118) .
"LATCH."
No function is assigned .
Controller number 1–31, 32, 33–95
CC16 (General-1)–CC19 (General-4) and CC80 (General-5)–CC83 (General-8) apply specific effects if
a SuperNATURAL acoustic tone is selected (p . 118) .
Aftertouch
Switch between mono/poly .
Turn the chorus on/off .
Turn the reverb on/off .
Turn the master EQ on/off .
Turn the total effect on/off .
Lower the keyboard range by a semitone .
Raise the keyboard range by a semitone .
The setting is turned on/off each time you press the button .
The setting is turned on while you hold down the button, and turned off when you release the
button .
Specifies whether the functions controlled by the SOUND MODIFY knobs will be determined by
the system settings (SYSTEM) or by the studio set settings (STUDIO) .
*
Knob Assign Source (System) is a system parameter .
* "SYSTEM,"
If you choose the settings of the studio set parameters Sound Modify Knob 1–6
Assign are ignored .
No function is assigned .
Controller number 1–31, 32, 33–95
CC16 (General-1)–CC19 (General-4) and CC80 (General-5)–CC83 (General-8) apply specific effects if
a SuperNATURAL acoustic tone is selected (p . 118) .
Applies the same effect as when the pitch bend lever is moved .
Aftertouch
Controls parameters 1–3 of the Total Effect .
[S1] [S2]
buttons will be determined by the