Ep Ampsim G Tremolo; Ep Ampsim G Chorus; Ep Ampsim G Flanger - Roland FA-06 Parameter Manual

57: EP AmpSim g Tremolo

L in
EP Amp
R in
Parameter Value
OLDCASE,
Type NEWCASE,
WURLY
Bass # -50–+50
Treble # -50–+50
OD Switch OFF, ON
OD Gain 0–127
OD Drive 0–127
Tremolo Switch # OFF, ON
0 .05–10 .00 Hz,
Tremolo Rate #
note
Tremolo Depth # 0–127
Tremolo Duty -10–+10
LINE, OLD, NEW,
Speaker Type
WURLY, TWIN
Level 0–127

58: EP AmpSim g Chorus

L in
EP Amp
R in
Parameter Value
OLDCASE,
Type NEWCASE,
WURLY
Bass #
-50–+50
Treble # -50–+50
OD Switch
OFF, ON
OD Gain 0–127
OD Drive
0–127
Chorus Switch # OFF, ON
Chorus Pre Delay 0 .0–100 .0 ms
0 .05–10 .00 Hz,
Chorus Rate #
note
Chorus Depth # 0–127
D100:0W–
Chorus Balance #
D0:100W
Speaker Tremolo
Explanation
Type of amp
OLDCASE: a standard electric piano
sound of the early 70s
NEWCASE: a standard electric piano
sound of the late 70s and early 80s
WURLY: a standard electric piano
sound of the 60s
Amount of low-frequency boost/cut
Amount of high-frequency boost/cut
Overdrive on/off
Overdrive input level
Degree of distortion
Tremolo on/off
Rate of the tremolo effect
Depth of the tremolo effect
Adjusts the duty cycle of the LFO
waveform used to apply tremolo .
Type of speaker
* If LINE is selected, the sound will
not be sent through the speaker
simulation .
Output Level
Balance D
Balance W
Speaker Chorus
Balance W
Balance D
Explanation
Type of amp
OLDCASE: a standard electric piano
sound of the early 70s
NEWCASE: a standard electric piano
sound of the late 70s and early 80s
WURLY: a standard electric piano
sound of the 60s
Amount of low-frequency boost/cut
Amount of high-frequency boost/cut
Overdrive on/off
Overdrive input level
Degree of distortion
Chorus on/off
Adjusts the delay time from the direct
sound until the chorus sound is heard .
Frequency of modulation
Depth of modulation
Volume balance of the sound that
passes through the chorus (W) and
the unprocessed sound (D)
Parameter
L out
Speaker Type
R out
Level

59: EP AmpSim g Flanger

L in
EP Amp
R in
Parameter
Type
Bass #
Treble #
OD Switch
OD Gain
OD Drive
Flanger Switch # OFF, ON
Flanger Pre
Delay
Flanger Rate #
L out
Flanger Depth #
Flanger
Feedback #
R out
Flanger Balance
#
Speaker Type
Level
MFX Parameters
Value Explanation
Type of speaker
LINE, OLD, NEW,
*
If LINE is selected, the sound will
WURLY, TWIN
not be sent through the speaker
simulation .
0–127 Output Level
Balance D
Feedback
Speaker Flanger
Balance D
Value Explanation
Type of amp
OLDCASE: a standard electric piano
sound of the early 70s
OLDCASE,
NEWCASE,
NEWCASE: a standard electric piano
WURLY
sound of the late 70s and early 80s
WURLY: a standard electric piano
sound of the 60s
-50–+50 Amount of low-frequency boost/cut
-50–+50 Amount of high-frequency boost/cut
OFF, ON Overdrive on/off
0–127 Overdrive input level
0–127 Degree of distortion
Flanger on/off
Adjusts the delay time from when the
0 .0–100 .0 ms direct sound begins until the flanger
sound is heard .
0 .05–10 .00 Hz,
Frequency of modulation
note
0–127 Depth of modulation
Adjusts the proportion of the flanger
sound that is fed back into the effect .
-98–+98 %
Negative (-) value will invert the
phase .
Adjusts the volume balance between
D100:0W– the sound that is sent through the
D0:100W flanger (W) and the sound that is not
sent through the flanger (D) .
Type of speaker
LINE, OLD, NEW,
*
If LINE is selected, the sound will
WURLY, TWIN
not be sent through the speaker
simulation .
0–127 Output Level
L out
Balance W
Balance W
R out
113