Pmt Tab - Roland FA-06 Parameter Manual

Parameter

PMT tab

Structure Type 1 & 2
Structure Type 3 & 4
Value
1–10
Explanation
Determines how partial 1 and 2, or partial 3 and 4 are connected .
The following 10 different types of combination are available .
TYPE 1
WG
PARTIAL 1 (3) TVF
Partial 2 (4) WG
TVF
TYPE 2
PARTIAL 1 (3) WG
TVA TVF
PARTIAL 2 (4) WG
TVF
TYPE 3
B: Booster
PARTIAL 1 (3) WG TVA TVF
B
PARTIAL 2 (4) WG TVF
TYPE 4 B: Booster
PARTIAL1 (3) WG TVA TVF
B
PARTIAL 2 (4) WG TVF
TYPE 5 R: Ring Modulator
PARTIAL1 (3)
WG TVA TVF
R
PARTIAL 2 (4) WG TVF
TYPE 6
R: Ring Modulator
PARTIAL1 (3) WG TVA TVF
R
PARTIAL 2 (4) WG TVF
TYPE 7 R: Ring Modulator
WG
PARTIAL1 (3) TVF TVA
R
PARTIAL 2 (4) WG
TVF
TYPE 8
R: Ring Modulator
PARTIAL1 (3) WG
TVF TVA
R
PARTIAL 2 (4) WG TVF
TYPE 9
R: Ring Modulator
PARTIAL1 (3) WG TVF TVA
R
PARTIAL 2 (4) WG TVF
R: Ring Modulator
TYPE 10
PARTIAL 1 (3) WG
TVF TVA
R
PARTIAL 2 (4) WG
TVF
PCM Synth Tone (PCMS)
With this type, partial 1 and 2 (or 3 and 4) are
independent . Use this type when you want to
TVA
preserve PCM sounds or create and combine sounds
for each partial .
TVA
This type stacks the two filters together to intensify
the characteristics of the filters . The TVA for partial 1
(or 3) controls the volume balance between the two
partials .
TVA
This type mixes the sound of partial 1 (3) and partial
2 (4), applies a filter, and then applies a booster to
distort the waveform .
TVA
This type applies a booster to distort the waveform,
and then combines the two filters . The TVA for partial
1 (or 3) controls the volume balance between the two
partials and adjusts booster level .
TVA
This type uses a ring modulator to create new
overtones, and combines the two filters . The partial
1 (3) TVA will control the volume balance of the two
partials, adjusting the depth of ring modulator .
TVA
This type uses a ring modulator to create new
overtones, and in addition mixes in the sound of
partial 2 (4) and stacks the two filters . Since the
ring-modulated sound can be mixed with partial 2
(4), partial 1 (3) TVA can adjust the amount of the
TVA
ring-modulated sound .
This type applies a filter to partial 1 (3) and
ring-modulates it with partial 2 (4) to create new
overtones .
TVA
This type sends the filtered partial 1 (3) and partial 2
(4) through a ring modulator, and then mixes in the
sound of partial 2 (4) and applies a filter to the result .
TVA
This type passes the filtered sound of each partial
through a ring modulator to create new overtones .
The partial 1 (3) TVA will control the volume balance
of the two partials, adjusting the depth of ring
TVA
modulator .
This type passes the filtered sound of each partial
through a ring modulator to create new overtones,
and also mixes in the sound of partial 2 (4) . Since the
ring-modulated sound can be mixed with partial 2
(4), partial 1 (3) TVA can adjust the amount of the
TVA
ring-modulated sound .
47