Cell Status Displays - Honeywell IntelliPath Series Installation And Setup Manual

NIC IP Address
xxx.xxx.xxx.xxx
NOTE: The Subnet Mask, Gateway IP Addr, DSN Serv IP and DHCP are only displayed if the Comm Path
Choice is "IP&Cell" or "IP".
Subnet Mask
xxx.xxx.xxx.xxx
Gateway IP Addr
xxx.xxx.xxx.xxx
DNS Serv IP
xxx.xxx.xxx.xxx
Encryption Test
AES Passed!
DHCP
OK

Cell Status Displays

NOTE: The Status Displays are available only if the Comm Path Choice is "IP&Cell" or "Cell".
[E] Operating with Cellular Service
RAT SigQuaI
LTE/3G *****
Press the [space] key to
go to the next screen.
Press the [backspace]
key to go to the last
screen.
IP Information Display
Displays the IP address assigned to this device.
Press the [Space] key to go to the next field.
Displays the 32-bit address mask used to indicate the portion (bits) of the IP
address that is being used for the subnet address.
Press the [Space] key to go to the next field.
Press the backspace [BS] key to go to the previous field.
Displays the IP address assigned to the Gateway.
Press the [Space] key to go to the next field.
Press the backspace [BS] key to go to the previous field.
Displays the IP address assigned to the DNS (Domain Name System)
server.
Press the [Space] key to go to the next field.
Press the backspace [BS] key to go to the previous field.
Performs a self-test of the AES encryption algorithm.
Press the [Space] key to go to the next field.
Press the backspace [BS] key to go to the previous field.
DHCP (Dynamic Host Configuration Protocol) indicates server is performing
satisfactorily.
Press the [Space] key to go to the Physical Link display.
Cellular Status Display Screen 1
REG
x
RAT – Radio Access Technology. – LTE or 3G
SigQual – Signal Quality (1-5 "*')
REG – Registration status where "x" can be:
N – Not Registered
H – Registered Home
S – Searching
D – Registration Denied
R – Registered Roaming
? – Unknown Registration State
If the RAT is LTE, the number of stars is derived from received power
(RSRP) and the received quality (RSRQ). The lower number of stars of the
two ratings is what is displayed as overall quality.
NOTE: For adequate signal strength, must be 2 stars or more.
RSRP:
Greater than -85dBm = 5 stars
-86dBm to -95dBm = 4 stars
-96dBm to -105dBm = 3 stars
-106dBm to -115dBm = 2 stars
-116dBm and lower = 1 star
LTE-CF Installation and Setup Guide
RSRQ:
Greater than -10dB = 5 stars
-11dB to -12dB = 4 stars
-13dB to -14dB = 3 stars
-15dB to -16dB = 2 stars
-17dB and lower = 1 star
22