Honeywell IntelliPath Series Installation And Setup Manual page 27

Section 5: Programmer Keyboard Commands
LTE Displays
RAT RSRP
LTE xxxx
RSRP MIN
xxxx xxxx
RSRQ MIN
xxxx xxxx
Cntry Netw
xxx xxx
GCell
xxxxxx
Band
xxx
Signal Display for LTE
RSRQ
RAT – Radio Access Technology.
xxxx
RSRP – Reference Signal Received Power
RSRQ – Reference Signal Received Quality
Press the [space] key to get to the next screen.
Press the [backspace] key to go to the previous field.
Min/Max Signal Display for LTE
MAX
RSRP – Current Reference Signal Received Power
xxxx
MIN – Minimum Receive Signal Level
MAX – Maximum Receive Signal Level
Press the [space] key to get to the next screen.
Press the [backspace] key to go to the previous field.
Min/Max Signal Quality Display for LTE
MAX
RSRQ – Current Reference Signal Received Quality
xxxx
MIN – Minimum Receive Signal Quality
MAX – Maximum Receive Signal Quality
Press the [space] key to get to the next screen.
Press the [backspace] key to go to the previous field.
Location Display for LTE
TAC
Cntry – Country Code
xxxxx
Netw – Network Code
TAC – Tracking area code
Press the [space] key to get to the next screen.
Press the [backspace] key to go to the previous field.
Cell Display for LTE
Chan
GCell – Global Cell ID
xxxx
Chan – RF Channel number (EURFCN)
Press the [space] key to go to the next screen.
Press the [backspace] key to go to the previous field.
LTE Status Display Screen 5
Mode
Band – LTE Band Number
xxxx
Mode – LTE Mode either FDD or TDD
Press the [space] key to go to Status Display Screen 1.
Press the [backspace] key to go to the previous field.
23