Download Print this page
Miele FNS 28463 E Installation Manual
Miele FNS 28463 E Installation Manual

Miele FNS 28463 E Installation Manual

Hide thumbs Also See for FNS 28463 E:

Advertisement

Quick Links

Installation
Installation
Fire risk and danger of damage
from appliances which give off heat.
Appliances which give off heat can
catch fire and set fire to the
refrigeration appliance.
Do not place appliances which give
off heat, such as mini-ovens, double
burner hobs or toasters on the
refrigeration appliance.
Fire risk and danger of damage
from open flames!
Open flames can set fire to the
refrigeration appliance.
Keep open flames (e.g. a candle)
away from the refrigeration
appliance.
Risk of damage due to
condensation on the external
appliance panels.
In environments with high humidity,
condensation can build up on
external appliance panels, which can
cause corrosion.
To prevent this, it is advisable to
install the appliance with sufficient
ventilation in a dry and/or air
conditioned room.
After installation, make sure that the
appliance door closes properly, that
the specified ventilation gaps are
adhered to, and that the appliance
has been installed in accordance
with these installation instructions.
11210830-03
Climate range
This refrigeration appliance is designed
for use within specific ambient
temperatures (climate range). Do not
use in ambient temperatures for which it
is not designed.
A lower room temperature leads to the
compressor switching off for longer
periods. This can cause the internal
temperature in the appliance to rise with
the risk of food deteriorating and going
off.
The climate range is stated on the data
plate inside the appliance.
Climate range
SN
N
ST
T
Ambient room
temperature
+10 to +32 °C
+16 to +32 °C
+16 to +38 °C
+16 to +43 °C

Advertisement

loading

Summary of Contents for Miele FNS 28463 E

  • Page 1 *INSTALLATION* 11210830-03 Installation Climate range Installation This refrigeration appliance is designed  Fire risk and danger of damage for use within specific ambient from appliances which give off heat. temperatures (climate range). Do not Appliances which give off heat can use in ambient temperatures for which it catch fire and set fire to the is not designed.
  • Page 2 *INSTALLATION* 11210830-03 Installation Ventilation Fitting the supplied wall spacers  The wall spacers supplied must be Risk of fire and damage due to used in order to achieve the stated insufficient ventilation! energy consumption values and to If the refrigeration appliance is not prevent the build-up of condensation ventilated sufficiently, the at high ambient temperatures.
  • Page 3 *INSTALLATION* 11210830-03 Installation Limiting the opening angle of the door The door hinges are set at the factory to enable the door to be opened up to 115°. If the appliance door hits an adjacent wall when opened, for example, the opening angle can be limited to approx.
  • Page 4 *INSTALLATION* 11210830-03 Installation – Fitting the soft-close mechanism  Insert the soft-close mechanism  on the door hinge side (at an angle initially) until it clicks into position.  Then press the other end of the soft- close mechanism into the opening. ...
  • Page 5 *INSTALLATION* 11210830-03 Installation If you intend to install your appliance side by side with another refrigeration appliance, please ensure that you observe the instructions in “Installation in a side-by-side combination”. The necessary installation parts are supplied with your appliance.  Fit the cover  on the door hinge. ...
  • Page 6 *INSTALLATION* 11210830-03 Installation Installation Aligning the appliance  Two people are required for installing the appliance.  The appliance must be empty to be installed.  Move the appliance carefully on floors that are sensitive to scratching  To align the appliance, adjust the to prevent damage.
  • Page 7 *INSTALLATION* 11210830-03 Installation Supporting the appliance door Installing the appliance in existing kitchen units  Risk of damage and danger of  injury due to the appliance door Risk of fire and damage due to swinging open or the refrigeration insufficient ventilation! appliance tipping over.
  • Page 8 *INSTALLATION* 11210830-03 Installation The larger the ventilation gap, the more economically the compressor will work. - A ventilation gap of at least 50 mm depth must be provided at the back of the appliance behind the whole width of the top box for air to circulate.
  • Page 9 *INSTALLATION* 11210830-03 Installation Appliance dimensions * Dimensions without wall spacers fitted. Appliance depth is increased by 15 mm with the wall spacers supplied fitted. [mm] [mm] FNS 28463 E ed/cs 1,850 1,815...
  • Page 10 *INSTALLATION* 11210830-03 Installation All fixings required for side-by-side Installation in a side-by-side installation are supplied with the combination appliance: To avoid a build-up of condensation and resulting damage, refrigerators and freezers should not generally be installed directly next to other such appliances (side by side).
  • Page 11 *INSTALLATION* 11210830-03 Installation The following tools are supplied with Installation the appliance: The backs of the appliances must be kept accessible to complete the installation.  The freezer must be installed to the The following additional tools are left of the other refrigeration required: appliance (when viewed from the front).
  • Page 12 *INSTALLATION* 11210830-03 Installation Notes on moving side-by-side Installation steps for the front of the appliance combinations: appliances  Push the combination alternately from the left and right corners. Whilst doing so grasp the outside front corners. Do not, under any circumstances, use your knees to ...
  • Page 13 *INSTALLATION* 11210830-03 Installation By fitting the upper connecting bracket  both appliances are aligned in height and depth. If one appliance stands higher than the other, start with the higher one first.  Place the appliances next to each other so that the fronts are aligned, leaving a gap of slightly over 40 mm between them.
  • Page 14 *INSTALLATION* 11210830-03 Installation Installation steps for the back of the appliances  Place the connecting bracket  so that the horizontal long slots are on the left hand side and secure them as  Place the connecting bracket  so follows: that the horizontal long slot is on the left hand side and secure it as 1.
  • Page 15 *INSTALLATION* 11210830-03 Installation The holes for securing the connecting bracket  have to be pre-drilled.  Place the connecting bracket  so that the horizontal long slot is on the left hand side and secure it as follows: 1. Secure it loosely with the screw . 2.
  • Page 16 *INSTALLATION* 11210830-03 Installation Additional installation steps for the front of the appliances  Place the trim  at the front of the appliance underneath the top connecting bracket and carefully work the trim  into the groove. Use  Adjust the front feet with the a soft cloth to do this to avoid spanner .
  • Page 17 *INSTALLATION* 11210830-03 Installation  Connect the side-by-side combination to the mains as described in the operating and installation instructions of the individual appliance.  Appliances with an ice cube maker: Connect the appliance to the mains water supply as described in “Water ...
  • Page 18 *INSTALLATION* 11210830-03 Installation  Warning! Risk of damage when moving the appliance combination! The assembled side-by-side combination is very heavy. Incorrect moving can cause dents. Follow the instructions on how to move it.  The side-by-side combination must be pushed very carefully into ...
  • Page 19: Changing The Door Hinging

    *INSTALLATION* 11210830-03 Installation Aligning the appliance door Changing the door hinging The appliance door(s) can be height- The appliance is supplied with left-hand adjusted at the lower hinge plates. hinging. If right-hand hinging is required, the hinges must be changed. Please note that the hinging must not be changed if this appliance is going to be installed side by side with another...
  • Page 20 *INSTALLATION* 11210830-03 Installation Preparing to change the door hinging Removing the top covers  Open the appliance door. To change the door hinging, you will need the following tools:  Place a suitable cover on the floor in front of the appliance to protect the ...
  • Page 21 *INSTALLATION* 11210830-03 Installation Removing the upper soft-close Removing the door mechanism  Danger of injury when removing the appliance door! The door is not secure as soon as the pin has been removed from the door hinge. The door must be held by a second person.
  • Page 22 *INSTALLATION* 11210830-03 Installation Changing over the lower hinge plate  Secure the hinge plate  on the opposite side, starting with screw  in the middle at the bottom.  Pull the hinge pin  complete with  Then screw in the other two washer and adjusting foot upwards to screws .
  • Page 23 *INSTALLATION* 11210830-03 Installation Changing over the upper door hinge  Slide the cover  off to the side.  Turn the cover 180° and refit it on the opposite side. Slide on the cover from the side and click it into position.
  • Page 24 *INSTALLATION* 11210830-03 Installation Preparing the upper door Useful tip: Place a suitable cover over a stable surface to protect the appliance door from damage. Place the door on it with the outside facing down. Changing over the door opening aid ...
  • Page 25 *INSTALLATION* 11210830-03 Installation  Refit the door opening aid  on the  Secure the door opening aid using opposite side. the screw with the plastic collar  and the screw without plastic The plastic lug on the slider must not collar . Do not overtighten the abut the door seal.
  • Page 26 *INSTALLATION* 11210830-03 Installation Changing over the soft-close mechanism If you want to limit the door opening angle to approx. 90° you need to fit the door opening angle limiter supplied before refitting the soft-close mechanism (see “Installation - Fitting the door opening angle limiter”). ...
  • Page 27 *INSTALLATION* 11210830-03 Installation Refitting the door  Use your fingers to insert the pin  into the door bearing bush.  Screw in the pin  (by approx. ¼ turn) until it clicks into position.  Fit the safety cover  onto the pin. ...
  • Page 28 *INSTALLATION* 11210830-03 Installation Securing the soft-close mechanism Fitting the upper covers  Open the door 90°.  Fit the cover  on the door hinge.  Fit the panel  so that it clicks into position.  Slide on the cover  until it clicks into position.
  • Page 29: Aligning The Appliance Doors

    *INSTALLATION* 11210830-03 Installation Aligning the appliance doors The appliance door can be aligned with the appliance housing after it has been fitted. In the following illustration the door is not shown in the closed position to make it easier to see what you have to To align the appliance door, use the outer slots in the lower hinge plate: ...
  • Page 30: Water Connection

    The stainless steel hose must only the refrigeration appliance is being be replaced by an original Miele used. spare part. A stainless steel hose Connect the refrigeration appliance which is suitable for use with to the drinking water supply.
  • Page 31 *INSTALLATION* 11210830-03 Installation Water supply – Connecting the stainless steel hose to the refrigeration appliance Ensure that all connections are watertight.  Risk of damage to the stainless steel hose. The water supply from the tap to the ice cube maker may become interrupted.
  • Page 32 *INSTALLATION* 11210830-03 Installation  Tighten the nut with the tool supplied  by turning it clockwise until the maximum torque is reached and the tool is over-torqued. – Connecting the stainless steel hose to the tap  Unscrew the safety cap from the nut ...
  • Page 33: Electrical Connection

    *INSTALLATION* 11210830-03 Installation The socket must not be concealed Electrical connection behind the appliance and must be The appliance must only be connected easily accessible so that the appliance using the connection cable supplied can be quickly disconnected from the (AC 220–240 V, 50 Hz supply).
  • Page 34 *INSTALLATION* 11210830-03 Installation Do not connect the refrigeration Connecting the appliance appliance to a stand-alone inverter such as those used with an autonomous energy source, e.g. solar power. When the refrigeration appliance is switched on, power surges could result in a safety switch-off. This could damage the electronics.