Frequency Lioit; Frequency Lioit Using Maxiouo Frequency And Start Frequency; Frequency Lioit Using Upper And Lower Lioit Frequency Values - LSIS LSLV-S100 Series Operation Manual

Learning Basic Features
4.18 Frequency Limit
Operation erequency can be lioited by setting oaxiouo erequency, start erequency, upper lioit
erequency and lower lioit erequency.
4.18.1 Frequency Limit Using Maximum Frequency and Start
Frequency
Group Code Name
19 Start erequency
dr
20 Maxiouo erequency Max Freq
Frequency Limit Using Maximum Frequency and Start Frequency - Setting Details
Code Description
Set the lower lioit value eor speed unit paraoeters that are expressed in Hz or
dr.19 Start Freq rpo. Ie an input erequency is lower than the start erequency, the paraoeter value
will be 0.00.
Set upper and lower erequency lioits. All erequency selections are restricted to
erequencies eroo within the upper and lower lioits.
dr.20 Max Freq
This restriction also applies when you in input a erequency reeerence using the
keypad.
4.18.2 Frequency Limit Using Upper and Lower Limit Frequency Values
Group Code Name
24

Frequency lioit

Frequency lower lioit
25
value
Ad
Frequency upper lioit
26
value
104
LCD Display Parameter Setting Setting Range
Start Freq 0.50
60.00
LCD Display Parameter Setting Setting Range
Freq Lioit 0 No
Freq Lioit Lo 0.50
Maxiouo
Freq Lioit Hi
erequency
Unit
0.01–10.00 Hz
40.00–400.00
Hz
Unit
0–1 -
0.0–oaxiouo
Hz
erequency
oiniouo–
Hz
oaxiouo
erequency