Setting The Entry And Exit Speed At Tillage And Enter To Memory; Setting The Operating Speed And Enter To Temporary Memory; Tillage With Operating Speed Temporarily Memorised - Zetor 8621 Forterra turbo Operator's Manual

1. SETTING THE ENTRY AND EXIT
SPEED AT TILLAGE AND ENTER TO
MEMORY
1. Indicator lamp H/O is off.
2. Set the entry and exit travel speed of
tractor by the keypad MIN or MAX
(for example 1600 RPM)
3. Press both keypads MAX and MEM.
(the speed is entered into permanent
memory).
4. Indicator lamp H/O is on.
ELECTRONIC ENGINE GOVERNOR
2. SETTING THE OPERATING SPEED
AND ENTER TO TEMPORARY ME-
MORY
1. Turn off the indicator lamp H/O by
keypad MEM.
2. Set the operating engine speed by
foot throttle control (foot throttle
pedal)
3. Press the keypad MEM. Indicator
lamp H/O turns on. The speed is
entered in permanent memory.
58
3. TILLAGE WITH OPERATING SPEED
TEMPORARILY MEMORISED
Since you entered the operating engine
speed into the temporary memory no
correction of speed is necessary.
System automatically maintains
constant level of operating engine speed
entered in the temporary
independently upon tractor load.
RPM16
the
memory