CHECKING THE ADJUSTMENT OF FRONT MASK HEADLIGHTS
Tractor must stand on horizontal ground and tires must be inflated to the specific
pressure when checking on a testing wall. Basic vertical setting of grill headlights
with low beam is adjusted with - 3,5 % tolerance from basic setting (measured at
stopped tractor with shipping weight). Light beams must be parallel with tractor axis
in horizontal direction.
-
Distance between testing wall and tractor headlight (5 m).
I
h
-
Height of headlight center above ground
-
Inclination of headlight (-3,5 %) to distance of testing wall = 17,5 cm
∆h
-
Raising the picture of asymmetric headlight (15%)
α
ELECTRICAL INSTALLATION
210
F 302
ADJUSTMENT
OF
HEADLIGHTS
Adjust the light by means of both screws
(1) for vertical and horizontal direction
simultaneously - horizontally
cally +1 to -6 .
Each light is adjusted separately. Bulb is
exchanged from the rear part of para-
bola. Slide out or remove the battery
because of limited space.
F 303
FRONT
GRILL
2 ; verti-