2
I
C Interface
The CPIP5430-RTM1 contains a 256 x 8 Serial EEPROM. The Serial
EEPROM provides for storage of the transition module configuration
information. The default I
Preparing the RTM
Figure 5-2
and various other components on the CPIP5430-RTM1. The configurable
headers are listed in the following table.
For pin assignments on the CPIP5430-RTM1, refer to
page
5-9.
Jumper
J15
J16
Note
http://www.motorola.com/computer/literature
2
C address for this EEPROM is $A6h.
illustrates the placement of the jumpers, headers, connectors,
Table 5-1. RTM Jumper Settings
Function
Enable VPD Write
Sets the CompactFlash card as Slave device of
the IDE channel.
Sets the Compact Flash card as Master device
of the IDE channel.
Items in brackets are factory default settings.
I2C Interface
Pin Assignments on
Setting
[2-3]
[No jumper]
[1-2]
5-5
5