Table of Contents
Advertisement
Introduction
The CPIP5430 series products include the following features. The
processor(s) are socketed PGA devices. The amount of memory available
and the availability of the PMC slots vary, based on the specific model. The
Hard Disk Drive (HDD), if installed, occupies one PMC site. The Rear
Transition Module, CPIP5430-RTM1, is an optional item.
The following table lists the features of the CPIP5430.
Feature
Form Factor
CPU/Cache
Chipset
System Memory
IDE Port
On-Board Super I/O
4Functional Description
Table 4-1. CPIP5430 Features Summary
Description
6U board (233.35, +0.0/-0.3mm x 160.0, +0.0/-0.3mm) 1-slot width
Supports rear I/O through J3 and J5
Supports Intel Mobile Pentium 4 Processor-M processor with 512KB
on-die L2 cache at full core speed and 400 MHz FSB
Intel 875P MCH with 6300 ESB ICH
Supports up to 4GB of DDR memory
Supports ECC, on-memory bus
64-bit, 33/66 MHz, on board, PCI bus interface
Supports 266 MHz to 400 MHz DDR
Supports two onboard SO-DIMM sockets
Supports memory size up to 4GB
Supports 144-pin registered SO-DIMMs
ECC supported
Supports one (secondary) EIDE channel through J5 rear I/O for up to
two IDE devices
An onboard 44-pin IDE pin header for optional 2.5" hard drive or Disk-
on-Module on front controller (primary channel).
The function of the SIO is to provide legacy serial port controller
functionality (16550 compatible).
4
4-1
Advertisement
Table of Contents
