System Summary Descriptions - Motorola CPIP5430 Installation And Use Manual

Single board computer and transition module
Table of Contents

Advertisement

System Summary Descriptions

CPU
Base RAM
Extended RAM
Cache Size
BIOS Date
BIOS Core
IDE Drive 0 - 3
COM Ports
LPT Ports
Memory Mode
PMC Mode
USB Device
http://www.motorola.com/computer/literature
Displays the type and speed of processor installed.
Displays the amount of installed system RAM up to
640KB.
Displays the amount of installed extended RAM beyond
1024KB.
Displays the amount of L2 cache detected.
Displays the date on which the BIOS was generated.
Displays the core version that this BIOS was built upon.
Displays the drive type selected for each directly or RTM-
attached IDE drive (connected to on-board IDE controller).
Displays the I/O addresses of all installed serial ports.
Displays the I/O addresses of all installed parallel ports.
Displays the operating mode for the system memory.
Displays the PCI mode that the PMC slots are currently
operating in.
Displays the USB devices detected by the BIOS. Under
some circumstances, such as legacy USB support being set
to POST-Only, some USB devices might not be displayed.
System Summary Descriptions
3
3-7

Advertisement

Table of Contents
loading

Table of Contents