Firmware; Fwupdate - Supermicro SSH-C48Q User Manual

SSH-C48Q Switch CLI User's Guide

Firmware

Commands in this category are used to manage
firmware, such as display firmware revision,
update firmware, and other tasks.

fwUpdate

Updates the firmware.
: This command is only available on ISupermicro SSH-C48Q
NOTE
Switch Family.
fwUpdate [hostip username password directory
filename]
Firmware update uses FTP to retrieve the firmware
file, then writes the file to flash. If you omit
any options, the system prompts you to provide it,
as shown in the example.
hostip
Host IP address where the firmware file resides.
username
FTP user name.
password
FTP user password.
directory
After logging in, the directory to change to.
filename
Name of the firmware file.
84