Standardized Warning Statements; Warning Definition - Supermicro SSH-C48Q User Manual

Standardized Warning State-
ments
1-1 About Standardized Warning Statements
The following statements are industry standard warnings, provided to
warn the user of situations which have the potential for bodily injury.
Should you have questions or experience difficulty, contact
Supermicro's Technical Support department for assistance. Only
certified technicians should attempt to install or configure
components.
Read this appendix in its entirety before installing or configuring
components in the Supermicro chassis.
These warnings may also be found on our web site at
http://www.supermicro.com/about/policies/safety_information.cfm.

Warning Definition

Warning!
This warning symbol means danger. You are in a situation that
could cause bodily injury. Before you work on any equipment,
be aware of the hazards involved with electrical circuitry and be
familiar with standard practices for preventing accidents.
警告の定義
この警告サインは危険を意味します。
人身事故につながる可能性がありますので、いずれの機器でも動作させる前に、
電気回路に含まれる危険性に注意して、標準的な事故防止策に精通
して下さい。
此警告符号代表危险。
您正处于可能受到严重伤害的工作环境中。在您使用设备开始工作之前，必须充分意识到
触电的危险，并熟练掌握防止事故发生的标准工作程序。请根据每项警告结尾的声明号码
9