10.3 IP CONFIGURATION
The IP can be configured to user requirements/settings. Click "Save" button to save changes.
10.4 POE CONFIGURATION
To enable PoE and modify/set Power Limitation, Legacy Devices and Hi-PoE Mode settings, click the
PoE Enabled box and set appropriate values. Click "Save" button to save changes.
11 Reset to Factory Default
Changes made to settings, IP, PoE etc through the GUI are saved when in default position. If for any
reason the unit requires to be reset to factory settings the following command using the CLI (see
section 9) should be used. Note: All previous settings will be erased!
default_setting
Function: Reset configuration to default.
Format: {ds}
PAGE 14
OPTICAL SYSTEMS DESIGN
OSD2258P QUICK START GUIDE
DOC ID: 10118401