Siemens AVS75.39 Series User Manual page 177

Sensor state
Save parameters
Parameter reset
Siemens
Building Technologies
Line no. Operating line
6200 Save sensors
At midnight, the basic unit saves the statuses at the sensor terminals, provided the
controller has previously been in operation for at least 2 hours.
If, after storage, a sensor fails, the basic unit generates an error message.
Using this setting, the sensors can immediately be stored. This is necessary when,
for instance, a sensor is removed because it is no longer needed.
Line no. Operating line
6204 Save parameters
.
The current parameter settings can be stored as new default settings. Exempted
from this are the following operating pages: Time of day and date, operator section,
wireless, and all time programs, as well as the number of operating hours and the
different counters.
Warning
With this process, the factory settings will be overwritten and cannot be retrieved!
Line no. Operating line
6205 Reset to default parameters
The parameters can be reset to their default values.
Exempted from this are the following operating pages: Time of day and date,
operator section, wireless, and all time programs, as well as setpoint for manual
operation, number of operating hours and the different counters.
User manual RVS43.345
The settings in detail
177 / 239
CE1U2354en_021
2013-09-02