Appendix 2: Remote Communications; Approved Modems; Modem Or Isdn Terminal Adapter Connection; Modem Requirements - Honeywell Centraline LION Installation & Commissioning Instructions

LION System

Appendix 2: Remote Communications

For remote communications with up to three centrals, a
modem or ISDN terminal adapter can be connected directly
to the modem interface of the CLLIONLC01.
NOTE: Remote communication via modem or ISDN
terminal adapter requires firmware version V2.1.0
or higher.
NOTE: XBSi building supervisors are not supported for
remote communication.

Approved Modems

For information on modems approved for use with the LION
System, please refer to the "Frequently Asked Questions
and Troubleshooting" document available via the Honeywell
Technical Assistance Center (TAC) or, for Honeywell
employees, on the Intranet under:
http://web.ge51.honeywell.de/tac
Go there, and enter the catchword "modemfaq" in the
►
search field.
Modem or ISDN Terminal Adapter
Connection
The modem interface of the CLLIONLC01 accepts a
standard modem cable with a female 9-pin connector.
Fig. 61 Modem interface
Connect the cable that is supplied with the modem/ISDN
►
terminal adapter to the modem interface of the
CLLIONLC01 Controller.

Modem Requirements

A "Frequently Asked Questions and Troubleshooting"
document is available via the Honeywell Technical
Assistance Center (TAC) or, for Honeywell employees, on
the Intranet under:
http://web.ge51.honeywell.de/tac
Go there, and enter the catchword "modemfaq" in the
►
search field.

Troubleshooting

In case of any problems, the handbook of the modem or
ISDN terminal adapter must be consulted.
A "Frequently Asked Questions and Troubleshooting"
document is available via the Honeywell Technical
Assistance Center (TAC) or, for Honeywell employees, on
the Intranet under:
http://web.ge51.honeywell.de/tac
Go there, and enter the catchword "modemfaq" in the
►
search field.
45
Appendix 2: Remote Communications
EN1Z-0921GE51 R0315