Installation
Preparing for installation
This section contains the following information that will help you prepare for the computer
installation:
Safety precautions
●
System precautions
●
Required tools
●
Electrical specifications
●
Physical specifications
●
Service access specifications
●
Environmental specifications
●
Safety precautions
For your protection, observe the following safety precautions when setting up your equipment:
Follow all cautions, warnings, and instructions that are marked on the equipment.
●
Never push objects of any type through openings in the equipment. Objects might touch
●
dangerous voltage points or short out components, resulting in fire or an electric shock.
When moving the computer, be careful not to unplug any power or data cables.
●
Refer servicing of equipment to qualified personnel.
●
To protect both yourself and the equipment, observe the following precautions.
●
Item
Wrist or
foot strap
Cover
panels
Card slot
filler
panels
20
Avaya CMS Sun Fire V880/V890 Installation, Maintenance, and Troubleshooting
on page 20
on page 21
on page 22
on page 22
on page 23
on page 23
on page 24
Problem
ESD
System
damage and
overheating
System
damage and
overheating
Precaution
Wear a conductive wrist strap or foot
strap when handling printed circuit
boards.
Reinstall all cabinet cover panels after
you perform any service work on the
system.
Ensure that a filler panel is installed on
all empty card slots.
May 2006