Avaya Sun Fire V880 Installation & Maintenance page 174

Troubleshooting
Command name
ide@1
i2c@1,2e
i2c@1,30
i2c@1,50002e
i2c@1,500030
keyboard@x
network@x,x
pmc@1,300700
rsc-control@1,3062f8
rtc@1,300700
scsi@1
serial@1,400000
USB@1,3
exit
Additional references: See Sun OpenBoot 4.x Command Reference Manual at the following
Sun documentation Web site for more information:
http://docs.sun.com
174
Avaya CMS Sun Fire V880/V890 Installation, Maintenance, and Troubleshooting
Tests the IDE controller.
Tests the devices monitored by the I
monitoring bus (temperature sensors, fans, power supplies,
system fault LEDs, thermal fault LEDs, and front panel key
switch).
Tests the USB keyboard.
Tests the ethernet ports, including internal and external
loopback tests.
Tests the registers of the power management controller.
Tests RSC hardware, including RSC serial and Ethernet ports.
Tests the registers of the real-time clock and then tests the
interrupt rates.
Tests the on-board SCSI controller and SCSI bus subsystem for
internal removable media devices. Checks associated registers
and performs a DMA transfer.
Tests all possible data rates supported by the ttya and ttyb serial
lines and performs an internal and external loopback test on
each line at each speed.
Tests the writable registers of the USB open host controller.
Exits from the OpenBoot diagnostics.
Description
2
C environmental
May 2006