Sun Install Check - Sun Microsystems Sun Blade 2500 Getting Started Manual

Information for Setting Up the Solaris Desktop Operating System
TABLE 2-1
Setup Window
Solaris License Accept the Solaris Operating System License.
Solaris Release Choose the Solaris Operating System release.
Select Language Native language and locale to use for the workstation.
and Locale
Host Name A name to give the workstation.
Network Network or stand-alone workstation protocols. A system
Connectivity administrator might be required to complete this section.
(IP Address) Note: Depending on how you answer and what
information is provided by your network, you might also
be prompted for the workstation's IP address.
Kerberos Security Decline or accept and setup Kerberos security.
Name Service Name service to use: NIS+, NIS, DNS, LDAP, or None.
Note: This window is not displayed if the workstation is
not connected to a network.
Domain Name NIS or NIS+ domain for this workstation.
Note: This window is not displayed if the workstation is
not using the NIS or NIS+ service.
Name Server/ Name server (specify the server or have the workstation
Subnet/ find one on a local subnet).
Subnet Mask
Note: This window is not displayed if the workstation is
not connected to a network.
Time Zone Local time zone (select by geographic region, GMT offset,
or a time zone file).
Date and Time Current date and time (accept the default or enter the
current date and time).

Sun Install Check

The Sun Install Check tool verifies and provides information about workstation
software and hardware configuration. When installed, the Sun Install Check tool
occupies 15 MB of disk space.
14 Sun Blade 2500 Getting Started Guide • December 2004
Explanation and Notes Your Information